yesterday got everything to start….new chassis,mootherboard,cpu,cpu-coolers,memory,hdds,tuners
never thinked it will be more than 7 hours to build that machine
1., the original pack
nice new stuff with airshroud
airshroud – you cant use it, because of the CPU coolers
.
.
.
2., cabling…
you must be remove all of the fans, and fans-holders for cabling
.
.
.
.
.
Look! you’ve got enough space 
click on the pic to zoom!
.
.
.
.
3., mb in now
and now after removed all fan-holders too (left on the pic),
and then fixed the screws for the mb,
and then made the total cable system,
and then pulledback and fixed with tape all of the cables,
i can drop the mb to chassis
.
4., headache starting….
i installed the HDDs,
all cables fixed and inserted
powercords plugged in to the 2 PSU
and when i plugged in the 230V cables the PSUz started (ie.: PSU fans are spinning)
after 1 minute on the MB the BMC led start to blinking, this is ok
but no LED working on the front panel – power on or power failure on something else, nothing
and the power button is not working……
5., troubleshooting…..
many years of IT supporting behind my back
so, we tried to fix this issue
- checked all cabels, all connections, the CPUz, the memory modules, checked and tried everything…
- no luck
- ok, disassembling the MB, and then try with another simple PSU
- and it’s working! – simple connected to a chieftec 450w PC PSU, closed the power pins on the board and it’s powered up and running
- then i investigated those 2 redundant 800w psu in the chassis
- and the resolve: one of them isn’t working, i don’t know anything whats the problem with it, but it isnt working
- when im plugged in only the good psu, connected the electric power and then it is working good
- ok MB re-assembling to the chassis, re-cableing, re-connecting everything
- and VOILA! power leds are working on the front panel, buttons are working, MB can be powered on
- one thing only, the chassis and its psu controller beeping about the missing psu
- then i found the buzzer reset
at the top-right side of HDD backpanel
you need a screwdriver or something else for reseting
i simply disassembled the intrusion detection switch and temporarily plugged in, funny but it is working
i sentback the bad psu, and drop a question to the seller, how can be redundant this chassis if one the psu dead and then the MB isn’t starting?
so, that’s all…
now i’m installing the beyondtv, and testing
1. 800W Redundant Power Supply
